07560 Membrane Roofing/Acrylic Coating |
1. PRODUCT NAME
ACRYSHIELD® VAPOR BARRIER A410
Elastomeric Roof Coating
2. MANUFACTURER
NATIONAL COATINGS CORPORATION |
1201 Calle Suerte Camarillo, CA 93012 |
| Phone: |
800-423-9557 |
| FAX: |
800-294-3866 |
www.nationalcoatings.com |
3. PRODUCT DESCRIPTION
AcryShield Vapor Barrier A410
is a water-borne acrylic elastomeric coating with low permeance properties similar to solvent-borne butyl coatings, but without the high VOC.
A410 is specifically designed for coating the exterior of buildings and rooms where there is reverse vapor drive such as refrigerator rooms, cold storage facilities and food packing plants.
Engineered with advanced AcryLock™ technology, A410 provides superior adhesion over
a variety of roofing substrates. It is guaranteed to prolong the life of the roof it is applied to, and to reduce cooling energy costs when applied to dark roof surfaces.
| BENEFITS: |
APPROVALS: |
- Seamless Waterproofing
- Fully-Adhered Installation
- Superior Adhesion
- acrylic Durability
- Guaranteed to Prolong Roof Life
- Reduced Life-Cycle Costs
- Sustainable & Renewable
- Environmentally Friendly
- Low VOC
|
|
4. TECHNICAL DATA
See Table 1 on reverse side.
5. INSTALLATION
- Apply by spray, brush, or roller.
- All surfaces must be clean, dry, and free of dirt, grease, oil, or other contaminants that would interfere with proper adhesion.
- Apply at temperatures above 50ºF.
- Apply only when weather conditions will permit drying before rain, dew or freezing temperatures. (Cool temperatures and high humidity retard cure.)
- For application details see specific Guide Specifications.
6. AVAILABILITY AND COST
AcryShield Vapor Barrier A410 may be purchased directly from National Coatings Corporation.
For information call 800-423-9557.
7. WARRANTY
Various warranties are available for specific AcryShield Roof Management Systems and AcryShield SPF Roofing Systems installed by approved applicators.
8. MAINTENANCE
Periodic maintenance of systems containing A410 ensures extended performance and reduces life-cycle costs.
9. TECHNICAL SERVICES
Additional information, product brochures, and installation guide specifications are available.
10. FILING SERVICES
Additional product information is available from National Coatings.
ACRYSHIELD® Vapor Barrier A410
|
ASTM D6083 Technical Data |
Property |
Requirement |
Result |
| Initial Tensile Strength (psi) |
200 Minimum |
84 |
| Initial Elongation (%) |
100 Minimum |
534 |
| Dry Adhesion (pli)* |
No Reference |
2.9 |
| Wet Adhesion (pli)* |
2 Minimum |
1.8 |
| Tear Resistance (lbf / in) |
> 60 |
> 70 |
| 1000-hr Accelerated Weathering |
No Cracking or Checking |
No Cracking or Checking |
| Tensile Strength After Accelerated Weathering (psi) |
No Reference |
175 |
| Elongation After Accelerated Weathering (%) |
100 Minimum |
488 |
| Permeance (perms) |
See below* |
.04 perm inches |
| Water Swelling (%) |
20 Maximum |
< 20 |
| Fungi Resistance (Zero = No Growth) |
Zero Rating |
Zero Rating |
| Volume Solids (%) |
> 50 |
52 ± 1 |
| Weight Solids (%) |
> 60 |
65 ± 1 |
| Viscosity (KU) |
85-141 |
110 ± 10 |
| *ASTM E96BW at 30 mils |
This product is for industrial/commercial applications only. These suggestions and data are based on information we believe to be reliable.
They are offered in good faith, but without guarantee, as conditions and methods of use are beyond our control.
|
