|
 |
MANUFACTURER'S NAME:
|
NATIONAL COATINGS CORPORATION
1201 CALLE SUERTE
CAMARILLO, CA 93012
www.nationalcoatings.com |
EMERGENCY TELEPHONE: |
800-423-9557 |
DATE OF LAST REVISION: |
06/28/2007 |
SECTION I - PRODUCT IDENTIFICATION
| PRODUCT NUMBER: |
A400, A400FR, A410, A420, A500, A501, A510, A550, A590, A600, A640
|
| PRODUCT NAME: |
ACRYSHIELD® |
| PRODUCT CLASS: |
Acrylic Roof Coating |
SECTION II - INFORMATION ON INGREDIENTS
INGREDIENT |
CAS# |
% BY WEIGHT |
| ACRYLIC POLYMER |
NOT HAZARDOUS |
35 MAX |
| TITANIUM DIOXIDE |
13463-67-7 |
35 MAX |
| ZINC OXIDE |
1314-13-2 |
6 MAX |
| CALCIUM CARBONATE |
1317-65-3 |
40 MAX |
| HYDRATED ALUMINA |
21645-51-2 |
30 MAX |
| WATER |
7732-18-5 |
40 MAX |
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
| APPEARANCE: |
Milky white liquid |
EVAPORATION RATE: |
Less than 1 |
| BOILING POINT: |
212ºF |
WEIGHT PER GALLON: |
11-12 lbs |
| VAPOR DENSITY: |
Less than 1 |
% VOLATILE BY VOLUME: |
40-56% |
| VAPOR PRESSURE: |
Greater than 1 |
V.O.C. |
<23 g/L |
SECTION IV - REACTIVITY DATA
| STABILITY: |
Stable |
| HAZARDOUS POLYMERIZATION: |
Will not occur |
| HAZARDOUS DECOMPOSITION PRODUCTS: |
Acrylic monomers |
| CONDITIONS TO AVOID: |
Keep from freezing |
| INCOMPATIBILITY: |
None reasonably foreseeable |
SECTION V - FIRE & EXPLOSION HAZARD DATA
| FLAMABILITY CLASSIFICATION: |
Not DOT Regulated
Flash Point - Non combustible
LEL - N/A
|
| EXTINGUISHING MEDIA: |
N/A |
| UNUSUAL FIRE & EXPLOSIONS HAZARD: |
None |
| SPECIAL FIREFIGHTING PROCEDURES: |
For fires involving this material, do not enter any enclosed or confined space without proper protective gear, including self-contained breathing apparatus to protect against the hazardous effects of the normal products of combustion or oxygen deficiency. |
SECTION VI - SAFE HANDLING & USE INFORMATION
| RESPIRATORY PROTECTION: |
Wear suitable respirator (MSHA/NIOSH approved or equivalent) where exposure limits are exceeded. |
| VENTILATION: |
Mechanical local exhaust ventilation at point of containment release. |
| PROTECTIVE GLOVES: |
Impervious |
| EYE PROTECTION: |
Chemical splash goggles (ANSI Z-87.1 or approved equivalent) |
SECTION VII - HEALTH HAZARD DATA
EFFECTS OF OVER EXPOSURE:
- INHALATION: Vapor or mist can cause irritation of the nose, throat and lungs.
- EYE EXPOSURE: Possibly slightly irritating to eyes with direct contact.
- SKIN EXPOSURE: Possible skin irritant with repeated or prolonged contact.
EMERGENCY & FIRST AID PROCEDURES:
- INHALATION: Move subject to fresh air.
- EYE & SKIN CONTACT: Flush eyes with large amounts of water for at least 15 minutes. Wash affected skin areas with soap and water. See a physician if irritation persists.
- INGESTION: If swallowed give two glasses of water to drink. See a physician.
SECTION VIII - SPILL OR LEAK PROCEDURES
| STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: |
Keep spectators away. Floor may be slippery, use care to avoid falling. Scoop or shovel solid material into a suitable container for recovery or disposal. Keep spills out of municipal sewers and open bodies of water. |
| WASTE DISPOSAL METHODS: |
Disposal should be in accordance with Federal, state, and local regulations. |
SECTION IX - SPECIAL PRECAUTIONS
| PRECAUTIONS TO BE TAKEN IN HANDLING & STORAGE: |
Keep from freezing. |
| OTHER PRECAUTIONS: |
None |
|
| |
|
|
|
